Table of Contents
- 1 Why is my phone WiFi stuck on obtaining IP address?
- 2 Why is my WiFi repeater so slow?
- 3 Does WiFi extender change IP?
- 4 Why can’t my phone connect to Wi-Fi?
- 5 How can I make my WiFi extender faster?
- 6 How do I know if my Wi-Fi repeater is working?
- 7 How do I change the IP address of my repeater?
- 8 Why is my mobile data not working?
- 9 What frequency does a Wi-Fi repeater use?
- 10 Does the Wi-Fi repeater use the same password as the router?
Why is my phone WiFi stuck on obtaining IP address?
You can try rebooting your phone when it gets stuck on the “Obtaining IP Address” screen. This will do a soft refresh on the phone, which might might fix the issue for you. Press and hold down the Power button on your phone to display the power menu, then select Restart if you see that option.
Why is my WiFi repeater so slow?
A WiFi repeater needs to be able to clearly pick up the wireless signal from your router. Thick walls, floors, and ceilings can disrupt the connection and weaken the signal. This means that your wireless devices will only get half of the bandwidth available. Less bandwidth leads to slower connection speeds.
Why does my WiFi extender not obtain my IP address?
If your device is still not able to get the IP address: Move the extender closer to your router, and move your wireless device closer to the extender. Disable the wireless interface and enable it again to see if your wireless device can get the IP address.
Does WiFi extender change IP?
Yes. When you’re connected to the extender, the extender has to impersonate you to the access point. This means your hardware address will be seen as the extender’s hardware address on the original network and your own hardware address on the extender’s network. IP doesn’t care, but some protocols might.
Why can’t my phone connect to Wi-Fi?
Reset your phone’s network and OS settings Restarting your phone can clear glitches and help it reconnect to Wi-Fi. If your phone still won’t connect, then it’s time to do some resetting. In the Settings app, go to “General Management.” There, tap “Reset.” Your phone will restart — try connecting to Wi-Fi again.
How can I make my WiFi repeater faster?
Here are all the ways you can improve Wi-Fi coverage around your home
- Move your existing router to a better position.
- Buy a new, better router.
- Buy a mesh Wi-Fi kit.
- Buy a Wi-Fi extender / booster.
- Buy a powerline networking adapter set with Wi-Fi.
- Switch to 2.4GHz from 5GHz.
How can I make my WiFi extender faster?
Try things like putting the extender on top of a bookshelf or on an armoire. If the extender has adjustable antennas, you can reposition them to get the best signal. Even better, if the wireless booster has removable antennas, you might try swapping them for higher gain or amplified antennas to boost their sensitivity.
How do I know if my Wi-Fi repeater is working?
Go to Settings > Status to check the internet status of your extender. If everything is OK as shown below, your extender is successfully connected to your router. Connect your devices to the extender wirelessly or via an Ethernet cable.
Does repeaters have IP address?
A wifi repeater does not have an IP address. If you are configuring a router as an access point or setting on as a mesh or wds device then this needs to be set to be a different IP address. Change your router’s dhcp reservation to start at .
How do I change the IP address of my repeater?
- Login the Web-based Interface of your wireless access point or extender.
- Click Network on the left hand, and then change the IP address to the one which is not used but suitable for your network, then click on Save to save your settings.
Why is my mobile data not working?
“My mobile data is on but not working” could be caused by a minor system glitch or an error from your mobile operator that can be fixed by rebooting your phone. In that case, just reboot your phone to see if the trick works: You can restart most Android devices by long-pressing the power button for about 10 seconds.
Why is my Wi-Fi repeater not working properly?
Many users place the Wi-Fi repeater in a dead zone. This means that it will not be able to receive a signal from the router, so it will not work properly. We connect to the repeater from another device but it doesn’t really offer internet connectivity. We must connect the equipment in a location where it correctly receives the wireless signal.
What frequency does a Wi-Fi repeater use?
The vast majority of new Wi-Fi repeaters only forward signals at the frequency they receive them. That is, if a PC or other wireless device communicates with the amplifier using the 2.4 GHz frequency band, the amplifier will also communicate to your router on 2.4 GHz, even if both the repeater and the router support 5 GHz.
Does the Wi-Fi repeater use the same password as the router?
When I do so (correctly) I receive a message to the effect I have the wrong password. The wi-fi repeater should use the same password as the router. I only rely on wi-fi for my hand held devices. The iMac is connected by ethernet. The wi-fi repeater worked fine with my previous router from another ISP.
How do I connect to my wireless network using a repeater?
Select your network band (we recommend 2.4 GHz (B+G+N), where N allows speeds up to 300mbps or faster. Note that this repeater is not compatible with the newer 5 GHz band, available on dual-band routers. Click on “Site Survey.” Find the SSID of your wireless network and select “Connect.” You should see a message that you connected successfully.