Table of Contents
Is there a delay in microphone?
Any amount of latency in the audio recording system causes a delay between what the talent is performing and when they hear back what they’re performing. When connecting a microphone to a computer, we typically have a negligible amount of analog audio latency.
How far should you be away from the microphone when recording?
between 2 and 12 inches
Your best position will be somewhere between 2 and 12 inches from the face of your microphone. You should also place a pop screen filter about 1 to 2 inches from the mic and apply additional measures in your recording space and mix, as needed, based on your choice of distance.
Can you use 2 mics at once?
Connecting several mics to your computer with an audio mixer follows a surprisingly simplified process. All you have to do is connect the microphones (and any other input) to the mixer with XLR cables. Then, connect the mixer to your laptop through a USB cable. It’s that easy!
How do I fix audio delay?
- Set Digital audio out to PCM. Open the Settings menu. The options vary depending on the model year of your TV.
- Change the current A/V sync setting. Not all Androids have an A/V sync setting. Open the Settings menu.
- Set Pass through mode to Auto. Not all Android TVs have a Pass through mode setting.
What is the length of a microphone?
The appropriate length for the most common microphone (a large-diaphragm condenser) is 6-12 inches away from your mouth.
What is the distance between mic and mouth?
A good rule of thumb is to have the mic positioned about 6-12 inches away from your mouth. As you get closer to the mic, an increase in low frequency response can occur, causing your voice to be overly bassy.
Why are my vocals delayed?
In summary, audio latency is a time delay, usually in tens of milliseconds, between the creation of a sound and its playback or recording. This happens due to the difference between the speed of light traveling faster to your eye versus the speed of sound playing catch up to your ears.
Should you use more than one microphone when recording music?
Given that sound takes roughly a millisecond to travel a foot, it’s easy to see how recording the same instrument with more than one mic can quickly lead to phase-cancellation problems if the mics are at different distances from the sound source.
What happens when you delay the audio on a speaker?
If you gradually delay the audio going through the second channel, however, the peaks and troughs of the two sine waves shift out of alignment.
What happens to phase cancellation when the delay time increases?
However, when the delay times reach beyond about 25ms or so (depending on the sound in question), our ears start to discern the higher frequencies of the delayed signal as distinct echoes, rather than as a timbral change, and as the delay time increases phase cancellation is restricted to progressively lower frequencies.
What happens to a comb-filter response as delay increases?
As the delay increases, the comb-filter response marches further down the frequency spectrum, trailing its pattern of peaks and troughs behind it, which themselves get closer and closer together.