Table of Contents
How much weight a motor can lift?
The maximum torque is given as 1.2 kg*cm (which includes the gearbox-transition), which means having wheels with an radius of 1 cm (or 2cm in diameter) will give you a force that is equivalent to 1.2 kg in weight at nominal voltage, as long as your electronics can provide a current of 300 mA (load current).
How much weight can 1hp lift?
This means with 1 hp, you can lift about 550 lbs (250 kg) at a rate of 1 ft/sec, 1100 lbs at a rate of 0.5 ft/sec, 225 lb at a rate of 2 ft/sec, 1 lb at a rate of 550 ft/sec, and so on.
What is motor load?
A motor is a device that converts electrical energy into mechanical energy to act upon a mechanical load. The burden placed on the motor due to this mechanical activity is referred to as the motor load. The power rating is sometimes casually referred to as the motor’s size.
What is Z in DC motor?
N is the Speed of motor in (RPM) Z is the Number of conductors. A is the Number of parallel paths.
What is motor torque formula?
To calculate load torque, multiply the force (F) by the distance away from the rotational axis, which is the radius of the pulley (r). If the mass of the load (blue box) is 20 Newtons, and the radius of the pulley is 5 cm away, then the required torque for the application is 20 N x 0.05 m = 1 Nm.
What type of motor is used for a 100 kg lift?
DC series motor can be used for 100 kg lift. 1 kW if fully efficient and approximately 1.25 kw if motor is 80\% efficient. [1000/0.8] But nowadays 3 phase induction motors with Variable frequency drive [AC] are used in elevators.
How much power does it take to lift a 100kg weight?
Force needed to hold 100 kg against gravity = 100*9.8, rounding it up to 1000N. Let’s say the machine lifts it up at a rate of 1 meter per second. So power needed would be 1000 x 1 = 1kW. But this is the power needed without frictional and other losses.
How much power is needed to lift a 50mm Dia motor?
If you want to lift that at 1m/s, you will need 500 W, or maybe 2kW electrical input. Not possible in your 50mm dia motor. If you want to lift at 1mm/s, you will need 0.5W, perhaps 2W electrical input. Much more possible.
How far can a 1 hp motor lift 200 pounds?
One HP says that 33,000 pounds can be lifted one foot in one minute. or 1 pound could be lifted 33,000 feet in one minute or any combination that multiplies to 33,000 pounds x feet. So for the question of 200 pounds, 1 HP could lift it 165 feet in one minute. Should we use a smaller motor of 1/10 HP it would lift