Table of Contents
How do you calculate volume of a swimming pool?
Length x width x average depth x 7.5 = volume (in gallons) Length times width gives the surface area of the pool. Multiplying that by the average depth gives the volume in cubic meters. If you’d like to find the pool volume in gallons, multiply your results by 7.5, as there are 7.5 gallons for each cubic foot.
How many Litres of water are in a 25m pool?
2,500,000 litres or 2.5 megalitres of water.
How many Litres does the average swimming pool hold?
CIRCULAR POOLS
Feet | Metres | Approx. Litres |
---|---|---|
12 x 3 | 3.6 x 0.9 | 10,000 |
15 x 4 | 4.5 x 1.2 | 20,000 |
20 x 4 | 6.0 x 1.2 | 35,000 |
25 x 4 | 7.7 x 1.2 | 45,000 |
How many gallons of water are in a 18×36 pool?
Standard In-Ground Pool Volumes in Gallons by Size | ||
---|---|---|
18×36 | 17,000 | 24,300 |
19×38 | 19,000 | 27,100 |
20×40 | 21,000 | 30,000 |
22×44 | 25,400 | 36,300 |
How do you find the volume of a rectangular pool?
Length x width x depth x 7.5 = volume (in gallons) Length times width gives the surface area of the pool. Multiplying that by the depth gives the volume in cubic feet. Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool, expressed in gallons.
What is the formula for volume of a rectangle?
The formula for calculating the volume of a rectangular prism is volume = length × width × height. If its length is doubled, and the height is reduced to half, then its volume can be written as, V = (2l) × (w) × (1/2h). After simplifying this, we get l × w × h which is the regular formula for volume.
How do you calculate maximum pool capacity?
For example, suppose your pool has a total area of 1,600 square feet. You have one diving board, leaving 1,300 square feet for bathers. If the maximum depth of the pool is 5 feet, it can accommodate: 1,300 ÷ 20 = 65 people. If the entire pool is more than 5 feet deep, the capacity increases to: 1,300 ÷ 15 = 86 people.
How many Litres is a 15 foot round pool?
25,000
Rectangular Pools
Pool Shape | Pool Diameter in Feet | 5 Ft Avg. Depth |
---|---|---|
Round | 15 | 25,000 |
Round | 18 | 36,000 |
Round | 21 | 49,000 |
Round | 24 | 64,000 |
How deep is the water in a 52 inch pool?
Wall Height You typically fill a pool 4 inches from the top and have sand on the bottom so those pools actually held 3’6” of water. Many people wished they were deeper so the manufacturers started making 52 inch tall pools so that they would hold nearly 4 feet of water at 3′ 10”.
How do you calculate the surface area of a swimming pool?
Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool, expressed in gallons. Length times width gives the surface area of the pool.
How to calculate the cubic volume of a pool?
The cubic volume can be calculated by including the depth of the pool with the surface area. For accurate calculations, the pool should be divided into various areas according to the depth. Length times width gives the surface area of the pool.
How do you measure the length of a swimming pool?
Measure the length, width, and average depth of the pool, rounding each measurement off to the nearest foot or percentage of one foot. One inch equals 0.0833 feet. Therefore, multiply the number of inches in your measurements by 0.0833 to get the appropriate percentage of one foot. Example: 25 ft, 9 in. = 25 ft + (9 in. x 0.0833)
How do you calculate the volume of a shallow area?
Measure the length, width, and average depth of the shallow section, then take the same measurements for the deeper section. Calculate the volume of the shallow section and add that to the volume you calculate for the deeper section. Make sure to use the actual water depth in your calculations, not the depth of the container.