Table of Contents
- 1 How much power would it take to make a real lightsaber?
- 2 Is it theoretically possible to create a lightsaber?
- 3 How much power is in a lightsaber?
- 4 Do you have to be Force sensitive to use a light saber?
- 5 Does a Kyber crystal power a lightsaber?
- 6 How much power would it take to power a lightsaber?
- 7 What do you need to build your own lightsaber?
- 8 What power source does Michio build for the lightsaber?
How much power would it take to make a real lightsaber?
It turns out to be about 20 megawatts (MW). Given an average household power consumption of about 1.4 kilowatts (kW) at all times, the power draw of a lightsaber could run 14,000 average American houses until the battery ran out.
Is it theoretically possible to create a lightsaber?
It’s possible to make a lightsaber, a physicist explains Disney/Lucasfilm Exciting news for all you “Star Wars” fans out there — it’s possible to construct a lightsaber, according to a physics professor from UC Berkeley. These tiny accelerators could be made to fit into the handle of a lightsaber, Muller said.
Can a non force user build a lightsaber?
Non-Force Users can indeed use a lightsaber. Han Solo did it, but didn’t fight with it. In a non-canon story Boba Fett did however. You need to Force to block blaster bolts with them because that requires being able to predict where a shot that moves at that high of a velocity will land.
How much power is in a lightsaber?
6.96MW
The power output of a lightsaber was found to be 6.96MW, which dwarfs the output of common construction tools. This power is only two orders of magnitude smaller than that produced by small nuclear generators, showing that lightsabers are effective weapons.
Do you have to be Force sensitive to use a light saber?
There’s no innate skill with the Force required to turn the lightsaber on or off, but lightsaber training is an integral element of Jedi training. But Han Solo once also held a lightsaber, and Luke Skywalker began fighting with his long before he finished his Jedi training.
Can a lightsaber run out of power?
Though the lightsaber can charge itself, it does lose tiny traces of power with each exchange. They can eventually run out of power and need recharging. This happens in the Legends novel Shatterpoint, when Mace Windu’s lightsaber powers down in the middle of battle.
Does a Kyber crystal power a lightsaber?
Kyber crystals are what give lightsabers their power. Kyber crystals vibrate inside a lightsaber, and Jedi use these vibrations to achieve balance within The Force. For an example of this, think back to The Force Awakens.
How much power would it take to power a lightsaber?
The episode was a little silly, but the science wasn’t too bad. In end Michio decides to build a type of hand held plasma torch. Doing this, he estimated that the lightsaber would need a power source on the order of mega-watts.
How many lumens does a lightsaber pump out?
The lightsaber I built for this instructable in theory should be pumping out over 300 lumen… In theory. You will see later how I accomplished this. 1 x compatible optical lense to focus the LED to 10 degrees or less. 1 x method to control the current going into the LED – for the example a BuckPuck was used.
What do you need to build your own lightsaber?
You’ll need all the following parts to complete the process of building your own lightsaber: The lightsaber body, also known as the grip or handle, is the main housing for your lightsaber electronics, as well as the section you will hold during melee combat.
What power source does Michio build for the lightsaber?
In end Michio decides to build a type of hand held plasma torch. Doing this, he estimated that the lightsaber would need a power source on the order of mega-watts. He didn’t do what I was thinking.