Table of Contents
Can you use gasoline in a Nitro RC car?
Use Nitro. Before you fuel up, you need to know what kind of engine your RC vehicle has. If you bought a vehicle from a hobby shop that is a 1:8, 1:10, 1:12, or 1:18 scale model, there’s a good chance that it has a glow engine that uses nitro fuel, not gasoline.
How do you make nitromethane fuel?
Preparation. Nitromethane is produced industrially by combining propane and nitric acid in the gas phase at 350–450 °C (662–842 °F). This exothermic reaction produces the four industrially significant nitroalkanes: nitromethane, nitroethane, 1-nitropropane, and 2-nitropropane.
How do you make glow fuel for RC planes?
It is customary to quote glow fuel components by volume. A gallon (128 fluid ounces) of fuel with 20\% castor oil and 10\% nitromethane has 25.6 ounces of oil, 12.8 ounces of nitro, and 89.6 ounces of alcohol.
Is glow fuel the same as nitro fuel?
RC glow fuel, also often called nitro fuel, is a special blend of three main ingredients, plus a few minor additives, used in radio control model engines.
Can you mix nitro fuels?
Each brand may use different types or percentages of oil and other additives so you shouldn’t switch brands and nitromethane percentages at the same time. The bottom line is that switching nitro fuel is a matter of trial and error.
What fuel is used in nitro RC cars?
These engines are actually fueled by methanol, but the fuel is often doped with nitromethane as a performance additive. The ignition system consists of a glow plug – hence the older term “glow” engine – which has a coil of platinum-containing wire alloy, usually platinum-Iridium.
What kind of fuel do RC cars take?
nitro fuel
RC glow engines use nitro fuel, a methanol-based fuel with nitromethane and oil added. The amount of nitromethane in the fuel is typically about 20\% but could be anywhere in the 10\% to 40\% range or higher. Castor oil or synthetic oil is added to the fuel to provide lubrication and cooling.
Can you mix gasoline with nitromethane?
This means that nitro fuels carry two oxygen atoms as part of their chemical makeup. While nitromethane (CH3NO2) does not mix with gasoline, nitropropane (C3H7NO2) does. The whole object of an engine is to ingest air, which, when combined with the proper amount of fuel, creates a combustible mixture that makes power.
What fuel do RC planes use?
RC glow engines use nitro fuel, a methanol-based fuel with nitromethane and oil added. The amount of nitromethane in the fuel is typically about 20\% but could be anywhere in the 10\% to 40\% range or higher. Castor oil or synthetic oil is added to the fuel to provide lubrication and cooling.
Is Nitro RC fuel flammable?
Nitromethane is flammable on its own, even without oxygen, but it’s burning point is very high—higher than 4,000°F. The higher the percentage of nitromethane, the quicker the fuel can burn, translating into higher rpm and horsepower.
How much HP does nitromethane add?
With nitromethane, you only need 1.7 pounds of air. Drag racing motors are big, with an average engine displacement of 8.9 liters. When supercharged, they can produce about 6,000 horsepower.
Can nitro rc cars use any fuel other than nitro?
But the fact is that nitro RC cars cannot use any fuel other than nitro sadly. I have researched alternatives and which fuel can a nitro RC motor run, but it seems that the motor in the typical car isn’t strong enough to ignite fuels like diesel or petrol.
Can you use kerosene in a nitro car?
Kerosene tends to be less powerful and less flammable than both diesel and gasoline, and using it on a nitro car is a possibility. You are going to have to mix it with nitro fuel though.
How do you make your own nitro fuel?
To do your own nitro fuel, you need 3 ingredients: Pure nitromethane, methane, and castor oil. I would advise buying a gallon of nitro and methane and a small quart of castor oil. Mix these 3 ingredients, stir it, and you are good to go.
Why is nitromethane used as a fuel in fuel cells?
The high heat of vaporization of 0.56 MJ/kg together with the high fuel flow provides significant cooling of the incoming charge (about twice that of methanol), resulting in reasonably low temperatures. Nitromethane is usually used with rich air–fuel mixtures because it provides power even in the absence of atmospheric oxygen.