Table of Contents
Can I use 3200mhz RAM and 3600mhz RAM together?
If you pair faster ram with slower ram, it will run at the speed of the slower ram. Honestly though for a Ryzen 5 3600, 3200mhz ram should be fine (Hardware unboxed did a big memory scaling test and they found tweaking your timings on 3200mhz ram resulted in same performance as 3600mhz ram).
Can you mix RAM with different speeds?
You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.
Can I mix 3200 and 3400 ram?
Yup you are correct. 3200 limit but some users have successfully ran memory kits at 3400 without any issues in system stability or voltages on the ram. Just make sure the voltages are within range.
Is 3600MHz ram good for gaming?
The best RAM for gaming is the kit that unlocks your CPU’s stellar performance, and that means squeezing the best frame rates out of your gaming PC. For the vast majority of gamers, the best RAM kit would be a 16GB or 32GB set at 3,200MHz for Intel processors, or 3,600MHz for AMD’s latest CPUs.
Can I mix 3000mhz with 3200MHz?
Yes, as long as you can fit it in the slots on the motherboard the RAM will work (e.g. if your 2 sticks are 288 pin DDR4 DIMMs and your motherboard has 288 pin DDR4 slots for RAM).
Can I pair 3000mhz with 3200MHz RAM?
Yes. As long as you use DDR 4 you’re good to go. Issue: If you put 2400MHz DDR 4 RAM it will work at 2400MHz, if you put 3200MHz DDR 4 RAM it will work at 2666MHz.
Is it possible to overclock RAM to 3200mhz?
Yes, as long as the motherboard is DDR4 compatible. This means that the sticks are 288 DIMMs and the motherboard supports that. While the label on the RAM kit may say “3200mhz,” that is simply the speed it can run at when overclocked with XMP.
Can I use 2 sticks of RAM in a motherboard?
, Used computers for 30+ years, done some formal education. Yes, as long as you can fit it in the slots on the motherboard the RAM will work (e.g. if your 2 sticks are 288 pin DDR4 DIMMs and your motherboard has 288 pin DDR4 slots for RAM).
How to enable DDR4 RAM at 3200 MHz?
Also make sure your RAM is split between banks to enable 2 (dual) channel. All ddr4 will run at 2133 or 2400 until you change it in the bios. Enter the bios and enable the dram profile in the setting for DOCP or XMP. This will allow to run at 3200 with correct timings and voltage.
What is the speed of 3200 MHz on the memory?
That quoted 3200 MHz speed on the memory is likely an XMP profile, with the memory likely functioning at the JEDEC stock speed of 2400 or 2133 MHz without XMP enabled.